Venza AWD V6-3.5L (2GR-FE) (2010)
HINT
If an area other than that specified is coated by accident, wipe off the primer with a non-residue solvent before it dries.
NOTICE:
*
To prevent the glass from breaking at low temperatures, ensure that no primer adheres to the contact surface between the
moulding and glass during application.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
*
Do not apply too much primer.
(c) Apply adhesive to the quarter window assembly.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
(1) Cut off the tip of the cartridge nozzle as shown in the illustration.
Standard Dimension:
(2) Load the sealer gun with cartridge.
(3) Apply adhesive to the quarter window glass as shown in the illustration.