Venza AWD V6-3.5L (2GR-FE) (2010)
Windshield: Service and Repair
Installation
WINDOW / GLASS: WINDSHIELD GLASS: INSTALLATION
1. INSTALL NO. 2 WINDSHIELD GLASS STOPPER
(a) Using a brush or a sponge, coat the application area of 2 new No. 2 windshield glass stoppers with Primer G.
NOTICE:
*
Do not apply too much primer.
*
Allow the primer to dry for 3 minutes or more.
*
Throw away any leftover primer.
HINT
If an area other than that specified is coated by accident, wipe off the primer with a clean piece of cloth before it dries.
(b) Install the 2 new No. 2 windshield glass stoppers onto the windshield glass, as shown in the illustration.
Standard Dimension (w/o Sliding Roof):
Standard Dimension Panoramic (w/ Sliding Roof):
NOTICE:
Only the 2-piece type No. 1 windshield glass stoppers are supplied. Use the 2-piece type stoppers even if the 1-piece type stoppers were
used.
2. INSTALL NO. 1 WINDSHIELD GLASS STOPPER
(a) Install the 2 No. 1 windshield glass stoppers to the vehicle body, as shown in the illustration.