Venza AWD V6-3.5L (2GR-FE) (2010)
Wiper Switch: Service and Repair
Removal
WIPER / WASHER: WIPER SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
and Replacement/Removal
3. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE LOWER STEERING COLUMN COVER
(a) Turn the steering wheel assembly to the right and remove the screw shown in the illustration.
(b) Turn the steering wheel assembly to the left and remove the screw shown in the illustration.
(c) Disengage the 3 claws and remove the lower steering column cover.
5. REMOVE UPPER STEERING COLUMN COVER
(a) Disengage the 4 clips and 3 claws and remove the upper steering column cover.