Venza AWD V6-3.5L (2GR-FE) (2010)
(b) Disengage the 2 claws and remove the rear washer nozzle.
Installation
WIPER / WASHER: WASHER NOZZLE (for Rear Side): INSTALLATION
1. INSTALL REAR WASHER NOZZLE
(a) Engage the 2 claws to install the rear washer nozzle.
(b) Connect the washer hose.
2. INSPECT REAR WASHER NOZZLE See: Testing and Inspection/Washer Nozzle (for Rear Side)
3. ADJUST REAR WASHER NOZZLE See: Adjustments/Washer Nozzle (for Rear Side)
4. INSTALL REAR SPOILER ASSEMBLY See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Installation
5. INSTALL UPPER BACK WINDOW PANEL TRIM See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Reassembly