Venza FWD L4-2.7L (1AR-FE) (2009)
B. Using a clip remover disengage the 8 clips.
C. Pull out the rear door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
D. Raise the rear door trim board sub-assembly and remove the rear door trim board sub-assembly together with the rear door inner glass
weatherstrip.
E. Disengage the 2 claws and disconnect the rear door inside handle sub-assembly.
F. Disconnect the connector (for 13 Speakers).
5. Reassembly is reverse order of disassembly procedure.