Venza FWD L4-2.7L (1AR-FE) (2009)
A. Using a molding remover disengage the 2 clips and 4 claws.
B. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
4. Remove the power window regulator switch assembly with front door armrest base panel (for passenger side).
A. Using a molding remover disengage the 2 clips and 4 claws.
B. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.
5. Remove the courtesy light assembly.