Venza FWD L4-2.7L (1AR-FE) (2009)
1. Disconnect the cable from the negative (-) battery terminal.
2. Using a molding remover disengage the 3 claws and remove the front door inside handle bezel plug.
3. Remove the power window regulator master switch assembly with front door armrest base panel (for Driver Side).
A. Using a molding remover disengage the 2 clips and 4 claws.
B. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
4. Remove the power window regulator switch assembly with front door armrest base panel (for passenger side).