Venza FWD L4-2.7L (1AR-FE) (2009)
A. Using a plastic pry tool disengage the claw.
B. Disconnect the connector and remove the courtesy light assembly.
6. Remove the front door trim board sub-assembly.
A. Remove the 2 screws.
B. Using a clip remover disengage the 10 clips.
C. Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
D. Raise the front door trim board sub-assembly and remove the front door trim board sub-assembly together with the front door inner glass