Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2162001.png)
Trunk / Liftgate Motor: Service and Repair
Reassembly
DOOR / HATCH: POWER BACK DOOR DRIVE UNIT: REASSEMBLY
REASSEMBLY
1. INSTALL MULTIPLEX NETWORK DOOR ECU
(a) Connect the connector and install the multiplex network door ECU.
(b) Install the flat cable connector as shown in the illustration.
(c) Install the 3 screws.
(d) Engage the 4 claws to install the cover.
