Venza FWD L4-2.7L (1AR-FE) (2009)
(c) Using SST, install the front suspension member body mounting rear cushion LH as shown in the illustration.
Text in Illustration
NOTICE: Make sure that there is no clearance between the front suspension member and front suspension member body mounting rear
cushion LH.
2. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
(a) Temporarily install a new front suspension member body mounting rear cushion RH while confirming the installation direction.
NOTICE: Position the front suspension member body mounting rear cushion in the correct direction.
(b) Using SST, install the front suspension member body mounting rear cushion RH.
SST: 09830-10010
09830-01010
09830-01020
09830-01030
09830-01060
HINT: Perform the same procedure as the LH side.
3. INSTALL FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION