Venza FWD L4-2.7L (1AR-FE) (2009)
3. REMOVE REAR SEAT INNER TRACK BRACKET COVER See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Removal
4. REMOVE REAR SEAT OUTER TRACK BRACKET COVER See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Removal
5. DISCONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Removal
6. REMOVE REAR SEAT ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Removal
7. REMOVE ELECTRICAL KEY OSCILLATOR
(a) Disconnect the connector.
(b) Disengage the clamp and the electrical key oscillator.
NOTICE: Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
Installation
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Center Floor): INSTALLATION
INSTALLATION
1. INSTALL ELECTRICAL KEY OSCILLATOR
(a) Engage the clamp and install the electrical key oscillator.
NOTICE: Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL REAR SEAT ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
3. CONNECT REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
4. INSTALL REAR SEAT OUTER TRACK BRACKET COVER See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
5. INSTALL REAR SEAT INNER TRACK BRACKET COVER See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
6. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
7. INSTALL REAR SEAT HEADREST ASSEMBLY See: Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation