Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Disconnect the connector.
(b) Remove the 3 screws and the power seat switch.
Installation
SEAT: POWER SEAT SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER SEAT SWITCH
(a) Install the power seat switch with the 3 screws.
(b) Connect the connector.
2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY See: Service and Repair/Front Seat Assembly (for Power Seat)/Reassembly
3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB See: Service and Repair/Front Seat Assembly (for Power
Seat)/Reassembly
4. INSTALL RECLINING POWER SEAT SWITCH KNOB See: Service and Repair/Front Seat Assembly (for Power Seat)/Reassembly
5. INSTALL FRONT SEAT ASSEMBLY See: Service and Repair/Front Seat Assembly (for Power Seat)/Installation
6. INSTALL FRONT SEAT REAR INNER TRACK COVER See: Service and Repair/Front Seat Assembly (for Power Seat)/Installation
7. INSTALL FRONT SEAT REAR OUTER TRACK COVER See: Service and Repair/Front Seat Assembly (for Power Seat)/Installation
8. INSTALL FRONT SEAT HEADREST ASSEMBLY See: Service and Repair/Front Seat Assembly (for Power Seat)/Installation
9. INSPECT FRONT SEAT ASSEMBLY See: Service and Repair/Front Seat Assembly (for Power Seat)/Installation
10. INSPECT SRS WARNING LIGHT See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System