Venza FWD L4-2.7L (1AR-FE) (2009)
(b) Cut off the 25 tack pins that fasten the seat heater, and then remove the separate type front seat cushion heater assembly from the separate type
front seat cushion cover.
Installation
SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION
INSTALLATION
1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
(a) Using a tacker, install the separate type front seat cushion heater to the end of the separate type front seat cushion cover with 25 new tack pins.
NOTICE: Be careful not to damage the cushion.