Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2308001.png)
Seat Heater Switch: Testing and Inspection
SEAT: SEAT HEATER SWITCH: INSPECTION
INSPECTION
1. INSPECT SEAT HEATER SWITCH
(a) Inspect the driver side seat heater switch operation.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
If the result is not as specified, replace the switch.
(2) Turn the seat heater switch on and check if the seat heater switch indicator comes on.
OK:
If the result is not as specified, replace the switch.
