Venza FWD L4-2.7L (1AR-FE) (2009)
7. REMOVE LOWER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
8. REMOVE UPPER STEERING COLUMN COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal and
Replacement/Removal
9. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Removal
10. REMOVE UNLOCK WARNING SWITCH
(a) Disconnect the connector.
(b) Insert the key into the ignition key cylinder.
(c) Disengage the 2 claws and remove the unlock warning switch from the steering column upper bracket.
Installation
DOOR LOCK: UNLOCK WARNING SWITCH: INSTALLATION
INSTALLATION
1. INSTALL UNLOCK WARNING SWITCH
(a) Engage the 2 claws and install the unlock warning switch to the steering column upper bracket.
(b) Extract the key.
(c) Connect the connector.
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Installation