Venza FWD L4-2.7L (1AR-FE) (2009)
Spoiler: Service and Repair
Removal
EXTERIOR PANELS / TRIM: REAR SPOILER: REMOVAL
REMOVAL
1. REMOVE UPPER BACK WINDOW PANEL TRIM See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
2. REMOVE REAR SPOILER ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 hole plugs.
(c) Remove the 4 bolts.
(d) Disengage the 3 pins to remove the rear spoiler assembly.
3. REMOVE CENTER STOP LIGHT ASSEMBLY
(a) Remove the 2 screws and center stop light assembly.
4. REMOVE CENTER STOP LIGHT CORD ASSEMBLY
(a) Disconnect the connector and remove the center stop light cord assembly.