Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-2375001.png)
Spoiler: Service and Repair
Installation
EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION
INSTALLATION
1. INSTALL CENTER STOP LIGHT CORD ASSEMBLY
(a) Connect the connector and install the center stop light cord assembly.
2. INSTALL CENTER STOP LIGHT ASSEMBLY
(a) Install the center stop light assembly with the 2 screws to the rear spoiler assembly.
3. INSTALL REAR SPOILER ASSEMBLY
(a) Engage the 3 pins to install the rear spoiler assembly.
(b) Install the 4 bolts.
(c) Install the 2 hole plugs.
(d) Connect the connector.
4. INSTALL UPPER BACK WINDOW PANEL TRIM See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Reassembly
