Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Remove the union bolt and gasket, and separate the front flexible hose.
(b) Using a union nut wrench, disconnect the brake line from the front flexible hose while holding the front flexible hose with a wrench.
Text in Illustration
NOTICE:
-
Do not kink or damage the brake line.
-
Do not allow any foreign matter such as dirt or dust to enter the brake line.
(c) Remove the clip.
(d) Remove the bolt and front flexible hose from the absorber bracket.
Installation
BRAKE (FRONT): FRONT BRAKE FLEXIBLE HOSE: INSTALLATION
INSTALLATION
NOTICE:
-
Because the left and right hoses are not interchangeable, verify the part number when installing the flexible hoses.
-
If the hoses are to be reused, connect them after checking the identification marks placed when each hose was disconnected.