Venza FWD L4-2.7L (1AR-FE) (2009)
Removal
PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL
REMOVAL
1. REMOVE YAW RATE AND ACCELERATION SENSOR
HINT: Refer to the instructions for Removal of the yaw rate and acceleration sensor See: Antilock Brakes / Traction Control Systems/Yaw
Rate Sensor/Service and Repair/Removal.
2. REMOVE REAR NO. 2 AIR DUCT See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Removal
3. REMOVE REAR NO. 1 AIR DUCT See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Removal
4. REMOVE FRONT NO. 2 FLOOR SILENCER
(a) Remove the front No. 2 floor silencer.
5. LOOSEN PARKING BRAKE
(a) Remove the lock nut and No. 1 wire adjusting nut to completely loosen the parking brake.
Text in Illustration