Venza FWD L4-27L (1AR-FE) (2009) | Parking Brake Pedal Removal and Replacement
(e) Engage the 4 clamps to install the wire harness.
(f) Connect the 2 connectors.
(g) Connect the heated oxygen sensor connector and engage the 2 clamps (for 2GR-FE).
2. CONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY
(a) Holding the lock nut of the No. 1 parking brake cable assembly, tighten the turnbuckle of the No. 4 parking brake cable assembly to connect
the No. 4 parking brake cable assembly to the No. 1 parking brake cable assembly.
Text in Illustration
Torque: 5.4 Nm (55 kgf-cm, 48in-lbf)
3. INSTALL FRONT NO. 2 FLOOR SILENCER