Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-686001.png)
Intake Manifold: Specifications
INTAKE MANIFOLD
Install the intake manifold by tightening the 6 bolts in the sequence shown in the illustration.
Torque........................................................................................................................................................................................21 Nm (214 kgf-cm, 15ft-lbf)
THROTTLE BODY ASSEMBLY
Install the throttle body assembly with the 4 bolts.
Torque..........................................................................................................................................................................................10 Nm (102 kgf-cm, 7ft-lbf)
