Venza FWD L4-2.7L (1AR-FE) (2009)
Torque: 8.4 Nm (86 kgf-cm, 74in-lbf)
(c) Engage the clamp.
Text in Illustration
6. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY
(a) Engage the 4 claws to install the No. 6 heater to register duct assembly.
(b) Engage the clamp.
7. INSTALL NO. 1 CONSOLE BOX DUCT
(a) Install the No. 1 console box duct with the clip as shown in the illustration.
8. INSTALL FLOOR CARPET BRACKET LH
(a) Install the floor carpet bracket LH with the 3 clips.
(b) Engage each clamp.
9. INSTALL REAR NO. 1 AIR DUCT
(a) Engage the 2 claws to install the rear No. 1 air duct.
10. INSTALL REAR NO. 2 AIR DUCT