Venza FWD L4-2.7L (1AR-FE) (2009)
Backup Lamp: Service and Repair
Reassembly
LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY
REASSEMBLY
1. INSTALL REAR BUMPER UPPER RETAINER
(a) Engage the guide.
(b) Install the rear bumper upper retainer with the 2 screws.
2. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear turn signal light bulb to the rear combination light socket and wire.
(b) Turn the rear turn signal light bulb and rear combination light socket and wire in the direction indicated by the arrow shown in the illustration
to install them as a unit.
3. INSTALL TAIL AND STOP LIGHT BULB
(a) Install the tail and stop light bulb to the rear combination light socket and wire.
(b) Turn the tail and stop light bulb and the rear combination light socket and wire in the direction indicated by the arrow shown in the illustration
to install them as a unit.