Venza FWD L4-2.7L (1AR-FE) (2009)
Vanity Lamp: Service and Repair
Removal
LIGHTING (INT): VANITY LIGHT: REMOVAL
REMOVAL
1. REMOVE ROOF HEADLINING ASSEMBLY
HINT: Refer to the procedure up to Remove Roof Headlining Assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal.
2. REMOVE VANITY LIGHT ASSEMBLY
(a) Tilt the tab to disengage the 2 claws [A] and separate the bulb holder from the vanity light, as shown in the illustration.
Text in Illustration
(b) Disengage the claw [B] and remove the vanity light assembly.