Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-561010.png)
(4) If no fluid comes out of the overflow plug hole, remove the refill plug and gasket. Then add transaxle fluid through the refill hole until
fluid comes out of the overflow plug hole. Wait until the fluid flow slows and only drips come out.
NOTICE: Use Toyota Genuine ATF WS.
(5) Check that the fluid flow has slowed and only drips come out.
HINT: The fluid flow will not completely stop because the fluid expands as its temperature increases.
(c) Using a 6 mm hexagon socket wrench, install the overflow plug with a new gasket.
Test in Illustration
Torque: 40 Nm (408 kgf-cm, 30ft-lbf)
