Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-622002.png)
(a) Position the front axle hub bolt to be removed as shown in the illustration.
(b) Temporarily install the 2 nuts to the front axle hub bolt as shown in the illustration.
Recommended service nut:
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
NOTICE: Install the nuts to prevent damage to the front axle hub bolts.
(c) Using SST and a brass bar or an equivalent tool to hold the front axle hub, remove the front axle hub bolt.
SST: 09628-10011
Text in Illustration
5. INSTALL FRONT AXLE HUB BOLT
(a) Position a new front axle hub bolt to be installed as shown in the illustration.
(b) Temporarily install the new front axle hub bolt to the front axle hub.
(c) Install a washer and nut to the new front axle hub bolt as shown in the illustration.
Recommended service nut:
