Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-623002.png)
(a) Temporarily install the 2 nuts to the rear axle hub bolt as shown in the illustration.
Text in Illustration
Recommended service nut:
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
NOTICE: Install the nuts to prevent damage to the rear axle hub bolts.
(b) Using SST and a brass bar or an equivalent tool to hold the rear axle hub and bearing assembly, remove the rear axle hub bolt.
SST: 09611-12010
NOTICE: Do not damage the threads of the rear axle hub bolts.
5. INSTALL REAR AXLE HUB BOLT
(a) Temporarily install a new rear axle hub bolt to the rear axle hub and bearing assembly.
(b) Install a washer and nut to the new rear axle hub bolt as shown in the illustration.
Text in Illustration
Recommended service nut:
Thread diameter: 12.0 mm (0.472 in.)
Thread pitch: 1.5 mm (0.0591 in.)
HINT: The thickness of the washer is preferably 5 mm (0.197 in.) or more.
