Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-935002.png)
(e) Disconnect the connector [A] as shown in the illustration.
(f) Disconnect the connector.
(g) Disconnect the 2 connectors.
(h) Remove the 3 nuts.
(i) Disengage the 2 claws.
(j) Disconnect the connector [A] as shown in the illustration.
(k) Disconnect the 4 connectors and remove the main body ECU (driver side junction block assembly).
(l) Remove the 5 relays.
