Venza FWD L4-2.7L (1AR-FE) (2009)
(b) Disconnect the CAN No. 1 junction connector (A44).
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
C -- REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR - ECM)
B -- REPLACE ECM
A -- REPLACE ECM
12. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CAN NO. 1 JUNCTION CONNECTOR)
(a) Reconnect the CAN No. 1 junction connector.
(b) Disconnect the CAN No. 2 junction connector.
Text in Illustration