Venza FWD L4-2.7L (1AR-FE) (2009)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR -
CENTER AIRBAG SENSOR ASSEMBLY)
OK -- Continue to next step.
16. CHECK FOR SHORT IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - YAW RATE SENSOR)
(a) Disconnect the yaw rate sensor connector.
Text in Illustration