Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-982023.png)
(b) Disconnect the CAN No. 1 junction connector (D56).
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR)
OK -- REPLACE CAN NO. 1 JUNCTION CONNECTOR
6. CHECK FOR OPEN IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR)
(a) Reconnect the CAN No. 1 junction connector (D56).
(b) Disconnect the CAN No. 2 junction connector.
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
