Venza FWD L4-2.7L (1AR-FE) (2009)
Result:
C -- REPLACE POWER STEERING ECU
B -- REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
A -- Continue to next step.
26. CHECK FOR SHORT IN CAN BUS WIRES (MAIN BODY ECU)
(a) Reconnect the main body ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
OK -- REPLACE SMART KEY ECU ASSEMBLY (CERTIFICATION ECU)
27. CHECK FOR SHORT IN CAN BUS WIRES (COMBINATION METER)
(a) Disconnect the combination meter connector (E1).