Venza FWD L4-2.7L (1AR-FE) (2009)
(b) Disconnect the CAN No. 1 junction connector (D56).
Text in Illustration
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - CAN NO. 1 JUNCTION
CONNECTOR)
OK -- Continue to next step.
2. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR)
(a) Disconnect the CAN No. 1 junction connector (A44).