Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-982091.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 JUNCTION CONNECTOR -
POWER MANAGEMENT CONTROL ECU)
OK -- REPLACE POWER MANAGEMENT CONTROL ECU
11. CHECK FOR SHORT TO +B IN CAN BUS WIRE (CAN NO. 1 JUNCTION CONNECTOR - 4WD CONTROL ECU)
(a) Disconnect the 4WD control ECU connector.
