Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-982117.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 2 JUNCTION CONNECTOR - YAW
RATE SENSOR)
OK -- REPLACE YAW RATE SENSOR
14. CHECK FOR SHORT TO GND IN CAN BUS WIRE (CAN NO. 2 JUNCTION CONNECTOR - MAIN BODY ECU)
(a) Disconnect the main body ECU connector.
