Venza FWD L4-2.7L (1AR-FE) (2009)
9. DISCONNECT WIRE HARNESS
(a) Disconnect the 4 fuel injector connectors.
(b) Disconnect the 3 connectors.
(c) Remove the 2 bolts and 2 wire harness brackets.
(d) Detach the 2 clamps to disconnect the wire harness.
10. REMOVE VACUUM SWITCHING VALVE ASSEMBLY See: Variable Induction System/Variable Induction Control Valve/Service and
Repair/Removal
11. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY
(a) Remove the 2 bolts, and then remove the fuel delivery pipe together with the 4 fuel injectors.
NOTICE: Be careful not to drop the fuel injectors when removing the fuel delivery pipe.
(b) Remove the 2 fuel delivery spacers from the cylinder head.
(c) Remove the 4 injector vibration insulators from the cylinder head.
12. REMOVE FUEL INJECTOR ASSEMBLY
(a) Pull the 4 fuel injectors out of the fuel delivery pipe.