Venza FWD L4-2.7L (1AR-FE) (2009)
(b) Disconnect the fuel pump connector from the fuel pump and then remove the fuel pump harness.
(c) Remove the O-ring and spacer from the fuel pump.
NOTICE: Be careful not to damage the sealing surface.
HINT: If the O-ring still remains in the fuel filter, remove it using a wire tip (dia1 mm) that is formed as shown in the illustration.
5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY
(a) Remove the fuel pressure regulator from the fuel filter.
(b) Remove the 2 O-rings.