Venza FWD L4-2.7L (1AR-FE) (2009)
Fuel Gauge Sender: Testing and Inspection
1AR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT FUEL SENDER GAUGE
Text in Illustration
(a) Remove the fuel sender gauge.
(b) Check that the float moves smoothly between F and E.
(c) Measure the resistance between terminals 2 and 1 of the connector according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the fuel sender gauge.