Venza FWD L4-2.7L (1AR-FE) (2009)
Variable Induction Control Valve: Service and Repair
Installation
1AR-FE INTAKE / EXHAUST: VACUUM SWITCHING VALVE (for ACIS): INSTALLATION
INSTALLATION
1. INSTALL VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)
(a) Install the vacuum switching valve assembly (for ACIS) with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80in-lbf)
(b) Connect the 2 vacuum hoses, clamp and connector.
2. INSTALL OUTER COWL TOP PANEL See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front
Shock Absorber/Installation
3. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
5. INSTALL FRONT FENDER TO COWL SIDE SEAL LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
6. INSTALL FRONT FENDER TO COWL SIDE SEAL RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
8. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
9. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
10. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation