Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1205001.png)
Ignition Coil: Service and Repair
Removal
1AR-FE ENGINE CONTROL: IGNITION COIL AND SPARK PLUG: REMOVAL
REMOVAL
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
2. REMOVE IGNITION COIL ASSEMBLY
(a) Disconnect the 4 ignition coil assembly connectors.
(b) Remove the 4 bolts and 4 ignition coil assemblies.
3. REMOVE SPARK PLUG
(a) Using a spark plug wrench, remove the 4 spark plugs.
