Venza FWD L4-2.7L (1AR-FE) (2009)
Engine Control Module: Service and Repair
Removal
1AR-FE ENGINE CONTROL: ECM: REMOVAL
REMOVAL
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK
(a) Remove the windshield wiper motor and link See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Removal.
2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber/Removal
3. REMOVE COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Repair Instruction - Initialization.
6. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY See: Emission Control Systems/Evaporative Emissions System/Canister Purge
Control Valve/Service and Repair/Removal
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
10. REMOVE AIR CLEANER BRACKET
(a) Remove the 2 bolts and air cleaner bracket.
11. REMOVE ECM
(a) Separate the 3 wire harness clamps.