Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1936007.png)
(a) Engage the adjuster positioning hole with the guide and install the front shoulder belt anchor adjuster assembly with the 2 bolts.
Torque: 42 Nm (428 kgf-cm, 31ft-lbf)
2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY
(a) Engage the 2 guides.
(b) Install the front seat outer belt assembly with the bolt.
Torque: 7.5 Nm (77 kgf-cm, 66in-lbf)
(c) Connect the connector and lock the locking button as shown in the illustration.
NOTICE: Securely lock the locking button.
(d) Connect the shoulder anchor of the front seat outer belt assembly with the nut.
Torque: 42 Nm (428 kgf-cm, 31ft-lbf)
3. INSTALL UPPER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL LOWER CENTER PILLAR GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY
