Venza FWD L4-2.7L (1AR-FE) (2009)
/Page-1938001.png)
Seat Belt Extension: Technical Service Bulletins
Restraints - Seat Belt Extender Info.
T-SB-0315-08
Rev1
October 16, 2008
Toyota Seat Belt Extender
Service Category
Vehicle Interior
Section
Seat Belt
Market
USA
Applicability
TSB REVISION NOTICE
^
June 24, 2009 Rev1:
^
Applicability and Seat Belt Extender Application sections have been updated to include 2009 Venza.
Any previous printed versions of this service bulletin should be discarded.
Introduction
Toyota customers who find it necessary to increase the length of their seat belts may obtain Seat Belt Extenders at no cost through their local Toyota
dealer.
^
The extender is available in 6-inch, 9-inch, 12-inch, 15-inch, and 18-inch lengths.
^
The extender is available only in black.
^
Owners are informed of the Seat Belt Extender availability through the Owner's Manual included in each vehicle.
The customer (individual requiring the extender) must visit a Toyota dealership to have the required measurements made and to complete the Seat Belt
Extender Worksheet. The worksheet will allow the proper fitting and selection of a Seat Belt Extender for the customer. The dealership personnel should
then determine the applicable part number and place an order through Dealer Daily.
The dealership service department should complete the affixed Seat Belt Extender Customer Information Label on the part and review the "Owner
Instructions" with the customer. The dealership should give a copy of the completed worksheet and Owner Instructions to the customer and keep the
originals in the customer's file. To assure utmost owner satisfaction, it is recommended that a dealership designate one person to coordinate all activities
related to the Seat Belt Extender issue. It is recommended that dealerships do NOT stock Seat Belt Extenders due to the need for proper fitting to
individual customers.
This bulletin contains the following information:
