Venza FWD L4-2.7L (1AR-FE) (2009)
Hood Sensor/Switch (For Alarm): Service and Repair
Removal
THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: REMOVAL
REMOVAL
1. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal
2. REMOVE RADIATOR GRILLE PROTECTOR See: Body and Frame/Grille/Service and Repair/Removal
3. REMOVE RADIATOR GRILLE SUB-ASSEMBLY See: Body and Frame/Grille/Service and Repair/Removal
4. REMOVE HIGH PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/High Pitched Horn/Removal
5. REMOVE HOOD LOCK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Removal
6. REMOVE SECURITY COURTESY SWITCH
(a) Remove the spring.
(b) Remove the spring.
(c) Disengage the clamp and remove the 2 screws and security courtesy switch.