Venza FWD L4-2.7L (1AR-FE) (2009)
Seat Position Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL
REMOVAL
1. PRECAUTION
CAUTION: Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
2. REMOVE FRONT SEAT ASSEMBLY LH
for Manual Seat: See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Manual Seat)/Removal
for Power Seat: See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Power Seat)/Removal
3. REMOVE SEAT POSITION SENSOR
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.