Venza FWD L4-2.7L (1AR-FE) (2009)
Alternator: Service and Repair
Disassembly
1AR-FE BATTERY / CHARGING: GENERATOR: DISASSEMBLY
DISASSEMBLY
1. REMOVE GENERATOR PULLEY CAP
(a) Using a screwdriver, puncture the center of the generator pulley cap and pry it off.
NOTICE: Do not reuse the generator pulley cap.
2. REMOVE GENERATOR PULLEY WITH CLUTCH
(a) Mount the generator in a vise.
Text in Illustration
(b) Install SST (A) and (B) to the pulley as shown in the illustration.
SST: 09820-63021
(c) Use a wrench to hold SST (A), and turn SST (B) counterclockwise to loosen the generator pulley.
Text in Illustration
NOTICE:
-
Check that the drive end frame is secured in the vise tightly.
-
Hold SST (A) tightly during the operation.