Venza FWD L4-2.7L (1AR-FE) (2009)
Steering Wheel: Service and Repair
Installation
STEERING COLUMN: STEERING WHEEL: INSTALLATION
INSTALLATION
1. INSTALL STEERING PAD ATTACHING SCREW
(a) Install the 2 steering pad attaching screws to the lower steering wheel boss cover.
2. INSTALL LOWER STEERING WHEEL BOSS COVER
(a) Engage the 2 claws to install the lower steering wheel boss cover to the steering wheel sub-assembly.
(b) Install the 2 screws.
3. INSTALL NO. 1 STEERING WHEEL ORNAMENT (w/o Microphone)
(a) Engage the 2 pins to install the No. 1 steering wheel ornament to the steering wheel sub-assembly.
(b) Install the screw.
Torque: 2.4 Nm (25 kgf-cm, 21in-lbf)
4. INSTALL STEERING PAD SWITCH LH (w/o Microphone)