Venza FWD L4-2.7L (1AR-FE) (2009)
HINT: Perform the same procedure as the LH side.
9. TEMPORARILY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
10. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
11. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
12. TEMPORARILY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
13. INSTALL FRONT FRAME ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
14. FULLY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service
and Repair/Removal and Replacement/Engine Assembly/Installation
15. FULLY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
16. FULLY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
17. FULLY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 2GR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
18. TEMPORARILY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
19. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
20. TEMPORARILY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
21. TEMPORARILY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and
Exhaust/Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
22. INSTALL FRONT FRAME ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
23. INSTALL REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
24. FULLY TIGHTEN FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service
and Repair/Removal and Replacement/Engine Assembly/Installation
25. FULLY TIGHTEN ENGINE MOUNTING INSULATOR LH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
26. FULLY TIGHTEN ENGINE MOUNTING INSULATOR RH (for 1AR-FE) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
27. FULLY TIGHTEN REAR ENGINE MOUNTING INSULATOR (for 1AR-FE AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation
28. INSTALL STEERING LINK ASSEMBLY See: Steering/Steering Gear/Service and Repair/Installation
29. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
30. INSTALL FRONT NO. 1 STABILIZER BRACKET LH See: Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Installation
31. INSTALL FRONT NO. 1 STABILIZER BRACKET RH
HINT: Perform the same procedure as the LH side.
32. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
HINT: Refer to the procedure from Install Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation.
33. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)
HINT: Refer to the procedure from Install Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine Assembly/Installation.