Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Using SST and a press, remove the rear suspension member body mounting rear cushion from the rear suspension member sub-assembly.
SST: 09527-17011
SST: 09950-60010
09951-00340
SST: 09950-70010
09951-07100
HINT:
-
Install SST as shown in the illustration.
-
To prevent the rear suspension member sub-assembly from falling after removing the rear suspension member body mounting rear cushion,
support the rear suspension member sub-assembly using your hands and body while pressing.
17. REMOVE REAR SUSPENSION MEMBER BODY MOUNTING REAR CUSHION (for RH Side)
HINT: Perform the same procedure as the LH side.
18. REMOVE HOLE PLUG
(a) Remove the 3 hole plugs from the rear suspension member sub-assembly.
HINT: There are 2 sizes of the hole plugs.
19. REMOVE STUD BOLT (for LH Side)
(a) Remove the stud bolt.
20. REMOVE STUD BOLT (for RH Side)
HINT: Perform the same procedure as the LH side.