Venza FWD L4-2.7L (1AR-FE) (2009)
(a) Install the front coil spring upper insulator as shown in the illustration.
HINT: Any misalignment between the front shock absorber lower bracket and the alignment mark must be +/- 5°.
6. INSTALL FRONT COIL SPRING UPPER SEAT
(a) Install the front coil spring upper seat with the mark facing to the outside of the vehicle.
HINT: Any misalignment between the front shock absorber lower bracket and the alignment mark must be +/- 5°.
7. INSTALL FRONT SUSPENSION SUPPORT BEARING
(a) Install the front suspension support bearing as shown in the illustration.
Text in Illustration
HINT: If there is foreign matter inside the front suspension support bearing, replace it with a new one.
8. INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY